McCabe Gasoline Level Indicator Paste
Part No MC200 4.0 oz/ 113 g jar
McCabe Gasoline Indicator Paste is a light sky blue paste that turns a darker blue when immersed in:
- Gasoline
- Reformulated Gasoline (RFG)
- Diesel
- Kerosene
- Naphtha
- #2 heating oil
- Light crude oil
- Jet fuel
- Petrochemicals
- Plant oils.
- Smooth, easy to apply paste.
- Clear, accurate reading.
- Fast reaction time, just 5 seconds!
- The ideal, single source solution when partnered
with McCabe’s H2O Plus+ Water Level Indicator Paste
Easy to read results.
Fast reaction time.
to use:
Spread a smooth, even coat of the product on the bob or gauging device where you expect the air/product interface to be located.
Once entering the product, leave immersed for approximately five to ten seconds and the paste will turn a dark blue. (Please note: some heavier products may require a longer immersion time.)
When reading the results, note a straight, sharp demarcation on the gauging device, light blue above/dark blue below.
STORAGE:
- Tighten the cap after each use to avoid contamination.
- Store between 45 – 85 °F / 7 – 29 °C.
- Shelf Life: 3 years
Warning:
- Can cause serious eye irritation.
- Do not get in eyes, on skin, or on clothing.
- Wear protective gloves and eye protection.
- If on skin on or in eyes, rinse with water for several minutes.
- Wash contaminated clothing before reuse.
- If irritation persists, seek medical attention.